Car Repair Video Tutorials

Car repairs can be expensive, but they don't always have to be. With a little know-how and the right tools, you can save yourself a lot of money by doing your own car repairs. And there's no better way to learn how to do car repairs than by watching video tutorials.

In this post, we'll share with you some of our favorite car repair video tutorials. We'll cover everything from changing oil to fixing a flat tire. So whether you're a beginner or an experienced mechanic, there's something for everyone. Let's get started!

How to remove and replace the Car oil and Oil filter

Replacing car oil and the car oil filter is an important part of car maintenance, taking only an hour or two. First, make sure the car is level and allow it to cool before doing anything else. Find a car oil change near me, taking note of any special instructions the car manufacturer may have on their website. Drain the used car oil in a safe container, and use a wrench to loosen and remove the old oil filter. Replace it with a new one according to directions from your car oil change near me service provider. Now fill up your car with designated car engine oil (always use manufacturer’s recommended grade) through the same opening where you drained it from. Most car repair shops offer car wash services when performing an oil change; take advantage of this opportunity for a clean and shine afterward!

How to remove and replace the Air filter

Replacing your air filter should be a regular part of maintaining your car's health. If mold or other contaminants have been building up, it can have a noticeable effect on the air quality inside your vehicle, especially if you're relying on the air conditioning during the hot summer months. The good news is that replacing the filter isn't difficult at all; you just need to follow some basic steps. First, carefully remove the old filter and slowly discard it in an appropriate container for disposing of it. After that, put in the new filter – this will help ensure the cleanliness and smooth running of your car's interior space. With a little precaution and regular maintenance, you can keep mold from becoming a problem in your automotive space!

How to remove and replace the Spark plugs

Replacing your spark plugs is an important part of keeping your engine running smoothly and saving gas. If you haven't done it in a while, it's best to get started right away! First, locate the spark plug wires and disconnect each one from its respective spark plug. Then remove the old spark plug from the combustion chamber with a socket wrench and carefully inspect it. If necessary, install the new spark plug and make sure it's properly tightened for a secure fit. After that, turn on your vehicle's ignition to allow electricity to flow through the newly installed sparks so they can ignite quickly and run faster, resulting in better combustion. This simple step will ensure that your engine runs smoothly and save you money on fuel costs in the long run!

How to remove and replace the Serpentine belt

Replacing a serpentine belt is an important part of car maintenance. In order to make sure the replacement is successful, it's important to invest in the right serpentine belt and take your time when doing the repair. Serpentine belts usually cost between $20 and $50 depending on the size so thoughtful planning can help save you money. It's also important to note that serpentine belts are not timing belts. Since serpentine belts are more common, they don't last as long – typically around 50,000 miles or four years – and should be replaced sooner than a timing belt would need to be. It takes about an hour for most people to complete serpentine belt replacement; for those with more experience, it may only take around 30 minutes.

How to remove and replace the Brake pads and rotors

When it comes to brake systems, brake pads and rotors do the majority of the work. As a result, they can become worn out quickly and need replacing. It's important to know that brake pads and brake rotors cost varies depending on what type of car you have, but you should be ready to shell out at least $100 dollars for parts alone. If done properly, brake and rotor replacement can take only a few hours, if not less. How long do brake pads last? Typically they should hold up between 30,000 – 70,000 miles but it ultimately depends on your driving habits and the environment in which you drive in as well as how often you service it. Knowing these steps ahead of time will help ensure your brake pads and rotors are replaced correctly, and with minimal effort, so your car will remain safe for miles down the road.

How to remove and replace the Fuel filter

Replacing a fuel filter is not difficult, but it's important to make sure you use the correct fuel filter for your vehicle. This can be identified using a fuel filter cross reference, where you can locate the correct fuel filter for your vehicle. Once you've sourced the fuel filter, replacing it requires draining any fuel from the fuel line prior to detaching the two ends of the fuel line from either side of the fuel filter. Removing and replacing both fuel lines from either side of the fuel filter is essential during replacement. Even if only one end creates a leak after installation, it can cause engine damage or, worse – begin a fire in your engine bay! After securing both fuel lines onto each respective side of the new fuel filter and ensuring a tight fit, you're ready to start up and enjoy a smoother running engine thanks to your shiny new fuel filter!

How to remove and replace the Transmission filter and fluid

Replacing the transmission filter and transmission fluid is an easy job that can be done in an hour. By doing it yourself, you not only save the cost of labor but also have the peace of mind that comes with knowing your transmission is running cleanly and fluids are at the right level. The transmission filters are relatively inexpensive and available at most home improvement stores or online retailers, so picking up a few spare filters on your next shopping trip can ensure that you're never stuck waiting for one in case of an emergency. It's always good to take care of this preventative maintenance as it might help avoid more expensive issues down the road. Make sure to use the appropriate transmission fluid for your make/model when replacing fluids, as using one unsuitable for your transmission could end up meaning more work in the future.

How to remove and replace the Alternator

If your bad alternator is triggering a battery light on the dashboard, it's best to go ahead and swap it out for a new one. It can be done alone in about an hour with minimal effort and cost, but having another person you trust can help. First, shut off the engine, then disconnect both the negative and positive cables of the battery. Next, remove the upper alternator bracket and loosen the bottom generator-side pivot bolt. Once those bolts are loosened, you must unbolt all four main mount bolts that hold the alternator in place before you pull it out. Then get your new alternator into place by bolting up the same mount points while positioning the unit correctly. After reconnecting both battery cables at this point, try giving it a jumpstart just to make sure what was bad is replaced with good.

How to remove and replace the Starter motor

If a customer comes in needing to replace their vehicle's starter motor, it can be easy to do with the right tools and some expertise. To get started, one needs to know the cost of a new starter and the core cost. After costs are sorted out, disconnecting the battery is the first measure – since electricity courses through these parts, safety is paramount. Next, locate the starter motor and remove it from its housing. If core prices were included in the cost, ensuring that cores were returned properly is also necessary at this stage. Finally, connect the new starter in place of the old one and then put it back into its housing and test it before moving on. Experienced mechanics will have no problem removing and replacing a Starter motor with relative ease at cost-effective prices.

How to remove and replace the Water pump

Replacing a car's water pump may not be fun, but it is necessary to keep your car running in optimal condition. The cost for a car water pump replacement can vary, but it is typically around $150-400. When you need to remove and replace the water pump, start by looking for any signs of leaking fluid or overheating and topping up the coolant if needed. Then, you will want to disconnect the car's battery and any accessories attached to the water pump, such as hoses and electrical connectors. Next comes draining the old coolant and loosening all the nuts that connect to the water pump before you can completely remove it from its housing. Once removed, line up your new water pump and reattach everything that was taken off previously. Make sure that all bolts are tightened securely and refilled with fresh coolant before firing up your car and taking her out for a spin!

How to remove and replace the Thermostat

When it comes to replacing the thermostat, the cost is a major factor. It doesn’t have to cost an arm and a leg to get a new thermostat. There are plenty of manufacturers who offer reliable parts at more cost-effective prices. In some cases, you can even buy the part yourself and bring it to any mechanic’s shop for them to install, as this saves time and money. Just make sure you know what type of model and year your car is before you decide on the cost!

how to remove and replace the Radiator

Replacing your radiator can be done simply and affordably if you have the right tools and know-how. Start by turning off the engine to ensure it doesn't get too hot while you're still working on it. Taking off the radiator is fairly simple; begin by disconnecting any hoses or mounting clips connected to the radiator. Then do a visual inspection of the radiator; if there are clear signs of rust or deterioration, a new radiator will cost less than repairing or rebuilding an old one. If you decide to opt for a used radiator, make sure to inspect it thoroughly for leakage and damage; this will minimize long-term costs in repairs due to lack of maintenance. Once you've chosen which radiator suits your car best, installation should only take around 30 minutes; ensuring you follow all installation steps correctly will prolong its life and keep your car running smoothly for less!

How to remove and replace the Valve cover gasket

Valve cover gasket replacement is a fairly easy task; it may just require a bit of time and patience. Before beginning the repair, make sure there are no leaks around the valve cover which indicate that the valve cover gasket needs to be replaced. Once you've identified the issue, you'll have to remove the valve cover and all its associated components. Depending on your vehicle's engine, this may be easier said than done due to limited access – so take care when disassembling things! With everything disconnected, simply remove and replace the valve cover gasket with a new one and reassemble in the opposite order. Make sure everything is fastened securely so that you don't experience any further breakdowns, as this could lead to increased costs.

All in all, we've explored how to remove and replace some of the most integral parts of your car. From oil filters to fuel filters and radiators to alternators, tackling these tasks can help reduce maintenance costs, improve the longevity of your vehicle, and ensure its safe operation. Even though these jobs may seem daunting at first, having knowledge of some general principles about auto mechanics can help you gain the confidence necessary for effectively replacing these components. The key is never to be afraid to ask questions either online or with a trusted local mechanic so that you can become a better-informed driver who is confident in their mechanical abilities. Now that you know more about your car's inner workings, take it out for a spin!


Sell your junk car online today
  • Get an Instant Offer and sell your car fast, it only takes minutes to get an accurate offer.
  • Guaranteed Offer what you are offered is the amount you will be paid, no decreasing on the value of your vehicle.
  • Cash for cars will be paid at the moment we pick up the vehicle, you get paid on the spot!